Auto Single Facer Line With 1400mm Electric Mill Roll Stand
ZJ-F shaftless mill roll stand
Structural features:
1.Symmetrical structure can also install two bundles of paper at the same time,Paper can be used for non-stop for a job;Adopts mechanical drive to complete the paper clamping, lifting, loosen, move on, around translational motion, etc.
2.each shaftless mill roll stand is equipped with two pieces of paper guide, two set of paper car;paper guide the use of channel 14 and the guide post weld,paper car adopt 10mmwelded stell,the length of track is 4500mm.
3.manual dics brake,add screw following
technical parameters:
1,Backstands action mode:mechanical electric operation
2,the range of paper jams:maximum:1400mm minimum:600mm
3,the diameter of paper jams:maximum:¢1400mm minimum:¢400mm
4,Unilateral maximum load:maximum2000Kg
SF-280S fingerless type single facer
Structural features:
1.Adopt vacuum suction structure, with high pressure strong blower. Suction with silencer.
2.base and wallboard cast iron wall, Wallboard thickness130mm.universal Joints.
3.corrugated roller material adopt48CrMo Alloy steel
4.pressure roller ¢ 284mm,surface grinding and chrome-plated;cylinder control and remove up and down, 45 carbon steel materials, quenching (with cushioning devices).
regular technical parameters:
1,effective width:1400mm
2,operation direction:left or right(determined in accordance with customer plant)
3,design speed:100m/min working speed:40m/min
4,temperature range:200-260ºC
5,corrugated flute:(UV type or UVV type)
roller diameters parameters:
1,diameter of corrugated roller: ¢280mm
2,diameter of pressure roller: ¢284mm
3,diameter of glue roller: ¢216mm
4,diameter of preheat roller: ¢320mm
Middle type SHEET CUTTER MACHINE
Structural features:
1.knife shaft drive gear with eccentric shaft installation, to achieve no backlash drive, high transmission accuracy.
2.cross-cutting knife with inserts steel blade. Fixed blade blade flat structure, more stable, more suitable for cutting high weight and high toughness of cardboard, the shear force is small, long blade life.
3.pull paper roller outsourcing non-slip material, more wear-resistant, accurate size.
4.host base and wall panels with high-grade gray cast iron, high strength, strong anti-vibration.
5.cutting length: 300mm-9000mm, cutting accuracy: ± 1.5mm (steady speed).
General technical parameters:
1.Working width:1400mm
2.Mechanical speed:60m/min
3.Minimum cut length:300mm
4.Maximum cutting length:9000mm
5.Cutting accuracy: uniform speed ±1.5mm
Audited Supplier 
){kind=link}