High speed automatic 5 ply corrugated cardboard production line for A,C,B,E,F Flute
ZJ-V5B hydraulic shaftless mill roll stand
structural feature:
1.adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others,the lifting of the paper adopts hydraulic drive.
2.brake adjustable adopts multipoint braking system.
3.every stand matched two sets paper car , and they can paper on the both sides at the same time.
technical parameters:
1,the range of clamping paper:MAX2200mm MIN1000mm
2,clamping diameters:MAX¢1500mm MIN¢350mm
3,main shaft diameter of paper holder:¢240mm
4,gas source work pressure(Mpa):0.4---0.8Mpa
5,equipment size:Lmx4.3*Wmx1.8*Hmx1.6
6,single weight:MAX4000Kg
Hydraulic system parameters:
1.Work pressure(Mpa):16---18Mpa
2,lifting hydraulic cylinder:¢100×440mm
3.Clamping hydraulic cylinder:¢63×1300m
4,hydraulic station motor power:3KW --380V -- 50Hz
5,solenoid valve voltage:220V 50 Hz
RG-1-900 top(core)paper preheat cylinder
RG-3-900 triple preheater
structural features:
1.preheat roller accord the pressure container national standards,and enclose the pressure container certificates and inspection certificate.
2.Each roller surface after grinding precision grinding and dealing with hard chrome plating, Surface friction is small, durable.
3.electric adjustment angle, and angle can rotation adjustment the preheat area in the range of 360°.
technical parameters:
1.Effective width:2200mm
2.diameter of preheat roller:¢900mm angle adjustment range:360°rotation angle shaft diameter:¢110mm×2
3.steam temperature:150-180ºC steam pressure:0.8-1.3Mpa
4,working power:380V 50Hz
5,Motor power:250W short(S2)working system
SF-360Q multi-cassette positive pressure single facer
structural feature:
★main flute roller:¢360mm(according flute differ),pressure roller¢415mm,preheat roller¢400mm.
★using negative pressure type design, low heat loss,helps the core paper to press evenly and close to the surface of corrugated roller, make the corrugate molding better, pressure uniform, the top of corrugate can glue uniform and better, make the single corrugated paper have perfect laminating.
★quickly change rollers in 10 minutes, while change corrugated roller with the electric trolley loading,the entire group of corrugated roller is put into the machine and fixed to the machine base,only need a button can complete the replacement of the flute roller ,quickly and easily.
★corrugated roll adopt 48CrMo high quality alloy steel,dealing with heating, after grinding hard chrome plating surface treatment.
★corrugated roll and pressure roll adopt the airbag control system with high stability, at the same time with pneumatic control buffer effect.
★Glue volume control with electric adjustment,rubber septum electric device,the glue system can operate independently when the motor stops,prevent glue exhausted.
technical parameters:
1,effective width:2200mm
2,operation direction:left or right(Determined in accordance with the customer's facility)
3,design speed:200m/min
4,temperature range:160-200ºC
5,air source:0.4-0.9Mpa
6,steam pressure:0.8-1.3Mpa
7,corrugated flute:(UV type or UVV type)
roller diameter parameters:
1,diameter of up corrugated roller: ¢360mm
2,diameter of pressure roller:¢415m
3,diameter of glue roller:¢269mm
4,diameter doctor roller :¢153mm
5,diameter of preheater:¢400mm
SM-E type double facer
Structural features:
1.Heating plate surface by grinding treatment,hot plate width600mm,a total of 18 pieces heating plate,Cooling stereotypes Department 5 m.
Preheat board is made of contacts board, in accordance with the national standard of pressure container, enclosed the pressure container certificate and inspection certificate.
2.Hot plate using the touch plate design structure. Plate movements using pneumatic spring-type structure.
3.On both sides of upper conveyor belt deviation adjustment adopts automatic adjustment,2 sets of the upper conveyor belt tensioning system.
technical parameters:
1,MAX.effective width:2200mm
2,operation direction:left or right(according to customers factory)
3,Highest mechanical speed:200m/min
4,temperature requirement:160-180ºC
roller diameter parameters:
1.up drive rubber roller diameter:¢700mm bottom drive rubber roller diameter: ¢400mm Wear rubber Outsourcing
2,Former follower with roller diameter:¢270mm After setting belt driven roller diameter:¢186mm
3,Pressure belt roller diameter: ¢70mm Shaping roller diameter:¢86mm
4,The belt tension roller diameter:¢130mm The roll diameter with detuning:¢124mm
5,Under the belt tension roller diameter:¢130mm Entrusted with the roll diameter under the belt:¢130mm
Note: All the roller surface after grinding are hard chrome plated.
Audited Supplier 
){kind=link}
){kind=link}