3 Ply Corrugated Cardboard Making Machine with 280S single facer
RG-1-600 top(core)paper preheater
Structural features: ★In accordance with national standard category pressure vessel,and with the pressure vessel certificate. ★The roll surface after precision grinding, fine grinding and hard chromium plating processing,surface friction,durable. ★electric adjustable angle, angle can rotate in the range of 360°,and adjust the paper preheat area.
technical parameters: 1,diameter of the preheat roller:¢600mm Diameter of the angle:¢85mm×2 2,work power:380V 50Hz 3,motor power:250W short(S2)work system
ZJ-F shaftless mill roll stand
Structural features: ★Symmetrical structure can also install two bundles of paper at the same time,Paper can be used for non-stop for a job;Adopts mechanical drive to complete the paper clamping, lifting, loosen, move on, around translational motion, etc. ★each shaftless mill roll stand is equipped with two pieces of paper guide, two set of paper car;paper guide the use of channel 14 and the guide post weld,paper car adopt 10mmwelded stell,the length of track is 4500mm. ★manual dics brake,add screw following ★electric elements centralized control the electric elements,expand chuck
technical parameters: 1,Backstands action mode:mechanical electric operation 2,the range of paper jams:maximum:1600mm minimum:600mm 3,the diameter of paper jams:maximum:¢1400mm minimum:¢400mm 4,Unilateral maximum load:maximum2000Kg
regular technical parameters: 1,effective width:1600mm
2,operation direction:left or right(determined in accordance with customer plant) 3,design speed:100m/min
4,temperature range:200-260ºC 5,corrugated flute:(UV type or UVV type)
roller diameters parameters: 1,diameter of corrugated roller: ¢280mm
2,diameter of pressure roller: ¢284mm 3,diameter of glue roller: ¢216mm
4,diameter of preheat roller: ¢320mm
powered motor parameters: 1,main drive motor:7.5Kw rated voltage:380V 50Hz Continuous (S1) working standard 2,suction motor:7.5Kw rated voltage:380V 50Hz Continuous (S1) working standard
SM-10 type double facer
Structural features: ★Heating plate surface by grinding treatment, hot plate width 600mm, a total of 12 heating plate and cooling 4 m. Heating plate with a container board production, in line with national standards for a class pressure vessel, with pressure vessel certificate and inspection certificate. ★Hot plate with intensive gravitational roll structure. Roll adopt pneumatic lifting.
roller diameter parameters: 1,upper drive rubber roller diameter:¢475mm lower drive rubber roller diameter : ¢350mm Wear rubber Outsourcing 2,Former follower with roller diameter:¢215mm back setting belt driven roller diameter:¢176mm 3,Platen roller: ¢70mm Setting roller diameter:¢86mm 4,upper belt tension roller diameter:¢155mm upper roll diameter with detuning:¢124mm 5, Entrusted with the roll diameter lower belt:¢130mm Note: All the roller surface after grinding are hard chrome plated.
Audited Supplier 
){kind=link}