Corrugator Belts for Corrugation Line

• Type: Yike Group Belt
• Material: Yike Group Belt
• Inside Material: Cotton
• Feature: Yike Group Belt
• Tensile Strength: Strong
• Transport Package: Pack
• Model NO.: YKC-Common edge
• Specification: 1400-2800MM
• Trademark: Yike
• Origin: China
• Production Capacity: 500000PCS/Year

Product Description

I: Introduction

Common edge Corrugator belt also named Corrugated board conveyor belt.

Common edge Corrugator belt is for Lower speed of corrugated board production line. 

 

II: Corrugator Belt Seam

1: USA Fastener clipper With Rubber                    

2: Hot Jaw Lacing

 

III: Technical Specifications:

 

Type	YKC-Common edge
Thickness	(9±0.30)mm
Width	(1600-2800)mm
Heat-resistance	240ºC
Tensile strength	75Mpa
Coefficient of friction	≥0.4u
Weight per unit	(7.5 ± 0.3)kg/m2
Air-permeability	2.2m3/m2min.

 

 

IV: Products Features

Tensile strength	Warp direction (63-75) Mpa in dry mode
Heat resistance	Raw materials are polyester synthetic fiber, softening point≥260ºC
Moisture absorption	Quick absorption and emission of heat, therefore cardboard can be quickly dried
Seams	Belt seam part is fabricated with imported steel fasteners and filled with rubber, flat surface, heat- resistance, fastness and non-marking
Suitability	Suitable for BHS, JS, TCY, CHAMPION, YIKE GROUP, FOSBER corrugators, various cardboards and some particular operation mode.
Geometrical dimension	Steady belt dimension, high weaving density, low stretching and contraction and good contact between belt surface and cardboard.
Service life	As long as the same products imported abroad.

 

V: BELT PHOTOS SHOW