| Customization: | Available |
|---|---|
| Certification: | ISO9001 |
| Material Capabilities: | Cotton & Sythetic |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
I: Introduction
II: Corrugator Belt Seam
1: USA Fastener clipper With Rubber
2: Hot Jaw Lacing
III: Technical Specifications:
|
Type |
YK-K Kevlar edge |
|
|
Thickness |
(9±0.30)mm |
|
|
Width |
(1600-2800)mm |
|
|
Heat-resistance |
240ºC |
(Kevlar Edge part up to) 350ºC |
|
Tensile strength |
75Mpa |
|
|
Coefficient of friction |
≥0.4u |
|
|
Weight per unit |
(7.5 ± 0.3)kg/m2 |
|
|
Air-permeability |
2.2m3/m2min. |
|
IV: Products Features
|
Tensile strength |
Warp direction (63-75) Mpa in dry mode |
|
Heat resistance |
Raw materials are polyester synthetic fiber, softening point≥260ºC |
|
Moisture absorption |
Quick absorption and emission of heat, therefore cardboard can be quickly dried |
|
Seams |
Belt seam part is fabricated with imported steel fasteners and filled with rubber, flat surface, heat- resistance, fastness and non-marking |
|
Suitability |
Suitable for BHS, JS, TCY, CHAMPION, YIKE GROUP, FOSBER corrugators, various cardboards and some particular operation mode. |
|
Geometrical dimension |
Steady belt dimension, high weaving density, low stretching and contraction and good contact between belt surface and cardboard. |
|
Service life |
As long as the same products imported abroad. |
V: FACTORY PHOTOS SHOW
VI: FAQ
Q: Could you provide free sample?
A: Yes, we can provide free sample together with our catalogue. But the courier charge will on your side. We'll send back the courier charge if you make an order.
Q: If the products can be customized?
A: Welcome OEM and ODM service, custom designs and dimensions are acceptable.
Q: How long about the delivery time?
A: Usually the delivery time is 20 days, for mass order,which based on your quantity.
){kind=link}