| Material: | Synthetics |
|---|---|
| Inside Material: | Synthetics |
| Feature: | Heat-Resistant |
| Tensile Strength: | Strong |
| Thickness: | 9-10 mm |
| Width: | 1400-2500mm |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Features
1.200mm kevlar edge
2. Composition of cotton, synthetic and IFDY
3.High moisture absorption and release; Low noise and high speed
4.Woven structure, anti-skidding
Introduction
Corrugator belt also named Corrugated board conveyor belt.
Corrugator belt is for corrugated board production line and developed specifically for Double Facer. Corrugator belts consistently keep the fastest absorption & release of moisture, which secures high quality cardboards with less consumption of heat and energy, and higher speed is assured. Corrugator belt have been specially developed for the transport of board and optimization of the drying process they resist the stress continuously and achieve as long a life as possible.
Type
Normal High speed corrugator belt & High speed corrugator belt with Kevlar edge
YK-K --- Reinforced Edges Kevlar armored on both edges
SPECIFICATION SHEET| Model | YK-K Kevlar Edge |
| Material | Synthetics |
| Kavlar Edge | 200 mm inwoven aramid edge |
| Thickness | 9-10 mm |
| Width | 1400mm-2500mm |
| Heat-resistance | 200ºC (Kevlar Edge part up to 350ºC) |
| Break strength | 70 Mpa |
| Coefficient of friction | ≥ 0.40µ |
| Weight per unit | (7.5±0.3)kg/m2 |
| Air-permeability 40mm water Column | 2.0m³/m2 min |
| Model | YK-C Common edge |
| Thickness | 9-10 mm |
| Material | Synthetics |
| Width | 1400mm-2500mm |
| Heat-resistance | 200ºC |
| Tensile strength | 65Mpa |
| Coefficient of friction | ≥ 0.40µ |
| Weight per unit | (7.5±0.3)kg/M2 |
| Air-permeability 40mm water Column |
2.0m³/M2 min |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}