| Customization: | Available |
|---|---|
| Certification: | ISO, CE |
| Material Capabilities: | Yike Group Belt |
|
Still deciding? Get samples of US$ 20/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
I: Introduction
Kevlar edge Corrugator belt also named Corrugated board conveyor belt.
Kevlar edge Corrugator belt is for Top belt of corrugated board production line.
II: Corrugator Belt Seam
1: USA Fastener clipper With Rubber
2: Hot Jaw Lacing
III: Technical Specifications:
|
Type |
|
YKK-Kevlar edge |
|
Thickness |
(9±0.30)mm |
|
|
Width |
(1600-2800)mm |
|
|
Heat-resistance |
|
240ºC (Kevlar Edge part up to) 350ºC |
|
Tensile strength |
75Mpa |
|
|
Coefficient of friction |
≥0.4u |
|
|
Weight per unit |
(7.5 ± 0.3)kg/m2 |
|
|
Air-permeability |
2.2m3/m2min. |
|
IV: Products Features
|
Tensile strength |
Warp direction (63-75) Mpa in dry mode |
|
Heat resistance |
Raw materials are polyester synthetic fiber, softening point≥260ºC |
|
Moisture absorption |
Quick absorption and emission of heat, therefore cardboard can be quickly dried |
|
Seams |
Belt seam part is fabricated with imported steel fasteners and filled with rubber, flat surface, heat- resistance, fastness and non-marking |
|
Suitability |
Suitable for BHS, JS, TCY, CHAMPION, YIKE GROUP, FOSBER corrugators, various cardboards and some particular operation mode. |
|
Geometrical dimension |
Steady belt dimension, high weaving density, low stretching and contraction and good contact between belt surface and cardboard. |
|
Service life |
As long as the same products imported abroad. |
V: BELT PHOTOS SHOW
){kind=link}