YK 1228 FULLY AUTOMATIC VACUUM FELXO FOLDER GLUER FFG LINE
LEAD EDGE Feeder Unit
Lead-edge Feeding System
Can measure the corrugated cardboard thickness, can adjustment feeding gap automatic
7.5KW high pressure centrifugal fans, according to the cardboard
warping degree of frequency control pressure, to ensure warp
cardboard or thin cardboard high-speed accurate transmission.
Left and right side baffle position electrically adjustable,
screw-driven.and can remember by computer.
Front baffle adjust the position of the upper and lower intervals
synchronization by manual.
Skip-feeding devices, could select skip-feeding according to needs. To ensure that large-scale cardboard can also be processed.
Install 7" touch screen, could automatically display the
production quantity, production speed, and set the production quantity and every operating.
Slotting part is equipped with the interlock switch, to achieve the
emergency stop, stop feeding or feeding.
Machine Separation &Combination
Button switches electrically control the separation and combination
of machine, with automatic alarm device, continuously alarm while moving, to ensure safety of operators.
Air pressure interlocks, lock securely, conveniently and accurately.
Machine clutch drive shaft is equipped with overload protection device.
Active self-locking function: if unit is not completely locking state,
the host cannot start, to ensure the safety of machine and operator;
while host normal working conditions, the unit clutch function is automatically lock, to avoid machine misuse and personal injury.
Dust-removal System
Adopt brush cleaning device, equipped with strong Negative pressure suction fan, clearing the dust, paper scrap or other waste, to improve printing quality.
Feeding Roller: Feeding Roller
Upper feeding roll adopts outer diameter φ156mm rubber roller,
elastic buffer wear rubber (inside soft, outside hard), dynamic balance correction, to ensure smooth and accurate feeding.
Lower feeding roller adopts embossed rollers, hard chrome-plated, wear and smooth.
According to cardboard thickness, adopt worm gear box gap tuning, with locking device. Adjustment range 0-12mm
Slotting Unit
Angle cutter made by ITALY model, cutting ring use Rubber materils
Computer auto control cardboard size by Linear guideway
6 shaft with rubber pre-creasing , creasing , slotter
The first pressure line round, after preloading cardboard not easily crush
The above press round Urethane appearance package, will not damage the cardboard
The slotter knife stock use traverse mechanism, screw with linear guide, to move more flexible and precise
Slotting phase and box height, computer and electric digital control
Preload, creasing gap adjustment adopt computer and electric digital control
The slotter knife stock gap adjustment adopt self-locking structure
There's the elastic corner-cutting knife. Can cut three, five, cardboard without adjusted.
Preload wheel, creas wheel, slot knife traverse position computer and electric digital control
The slotter knife adopt Anti-knife manner
Computer automatic arrange knife, can stockpile 999 memories
Die-cutting Unit
Rubber roller mechanical spiral commutation 40mm move about horizontal structure
Die-cutter phase, computer and electric digital control
Horizontal phase, computer and electric digital control, range ±5mm
Rubber roller and die roller gap use computer and electric digital control,
Adjust the transfer roller use computer and electric digital control,
The rubber roller compensated by motor-driven,control the speed of thr rubber roller, range ±3mm
Audited Supplier 
){kind=link}